Przejdź do treści
Blackroom jest otwarty — oferty Black Friday już są.okazje Black Friday
BikeroomBikeroom
Wybierz swój język
Wybierz swoją lokalizację
Afryka
Ameryka Południowa
Ameryka Północna
Ameryka Środkowa
Azja
Europa
Oceania
0
Pinarello Prince: A Used Buyer's Guide

Pinarello Prince: A Used Buyer's Guide

Summary

  • The modern Prince ran from early 2019 to February 2023, when Pinarello replaced it with the F series (F9, F7, F5).
  • The 2019 to 2020 frames take the Dogma F10's shapes; the 2021 update brought the Dogma F12's fully internal TiCR cable routing.
  • The FX versions use Toray T900 carbon in a 3K finish; the standard Prince uses T700 in a UD finish, which is the quickest visual tell.
  • Tyre clearance rose from 25 mm on the 2020 Prince to 28 mm on the 2021 model, according to Pinarello's white paper.
  • We found no recall or safety notice for the Prince in the press or in the US CPSC database.

The Prince was Pinarello's answer to riders who wanted Dogma looks without Dogma money. It shared the flagship's shapes and asymmetric frame in a less expensive carbon. Production ended in 2023, so every Prince you find today is pre-owned or old stock. Earlier frames that carried the Prince name in the 2000s are not covered here.

The generations

Prince MY19 to MY20 Prince MY21 to MY22
Launched Early 2019 Announced July 2020
Derived from Dogma F10 Dogma F12
Versions Prince, Prince FX (rim); Prince Disc Prince, Prince FX (rim); Prince Disk, Prince FX Disk
Carbon T700; FX in T900 T700 UD; FX in T900 3K
Claimed frame weight 940 g FX, 960 g Prince, 980 g Disc Not published
Cable routing Internal through the frame, eLink port for Di2 TiCR: fully internal through bar, stem and headset
Rim brake type Single pivot Direct mount
Max tyre 25 mm (per Pinarello) 28 mm

Prince MY19 to MY20

Road.cc described the 2019 Prince as looking like "a carbon copy of the Dogma F10". It kept the F10's concave down tube, the fork flaps and the eLink port for the Di2 junction box. Pinarello chose T700 and T900 carbon instead of the Dogma's T1100 to bring the price down. Claimed frame weights were 940 g for the Prince FX, 960 g for the Prince and 980 g for the Prince Disc.

Prince MY21 to MY22

The 2020 update, sold as MY21, moved the Dogma F12's front end onto the Prince. Pinarello's white paper describes four versions sharing one geometry across nine sizes. All of them use TiCR routing, with 1.5 inch bearings top and bottom, the same headset as the Dogma F12.

Rim brake versions switched to direct mount calipers. Disc versions use flat mount calipers with a 160 mm maximum rotor and 12 mm thru-axles. Pinarello declares 28 mm tyre clearance and explains that the real gap is designed at 37.5 mm, allowing for the 4 mm required by the ISO 4210 standard.

How to tell them apart

  • Look at the head tube. MY21 frames carry a 1.5 inch upper bearing for TiCR, and the cables usually disappear into the stem.
  • Look at the rim brakes. Two mounting bolts per caliper on fork and stays means direct mount, so MY21.
  • Look at the carbon finish. A visible woven 3K pattern indicates an FX; a smooth UD finish indicates the standard Prince.

Which version for which rider

  • If you prefer to work on your own bike, the MY19 to MY20 frame is simpler. Stem swaps and bearing service do not involve rerouting hoses through the headset.
  • If you ride rougher roads or want 28 mm tyres, choose the MY21. The older frame's 25 mm limit is restrictive by current standards.
  • If you want rim brakes, the MY21 rim version's direct mount calipers are the stronger option, and Pinarello cites brake makers claiming 12.5% more power in the dry and 25% in the wet over single pivot.
  • If weight and stiffness matter most, look for an FX. The standard T700 frame is the lower cost version, not a different geometry.

On ride quality, BikeRadar reviewed a rim brake Prince FX in October 2019, built with Shimano Ultegra and Fulcrum Racing 5 wheels. It found a firm, chattery ride on 25 mm tyres and weighed the bike at 7.94 kg.

What to check on a pre-owned one

We found no recall, safety notice or widely reported structural issue for the Prince. The checks below are model specific where the source allows, and generic otherwise.

  • Headset on TiCR frames. Bearing kits for the Prince TiCR are the 1.5 inch sizes shared with the Dogma F12, not a generic headset. Check for play and roughness, and allow for workshop time if bearings are due.
  • Cockpit size. MY21 frames accept the MOST Talon Ultra integrated bar or a MOST Tiger stem with a MOST Jaguar bar. Confirm which one is fitted, and its length and width, before you commit.
  • Stack adjustment. Pinarello's split spacers let you change bar height by up to 50 mm without disconnecting cables, so a high stack on a listing is not a dead end.
  • Brake standard. A direct mount rim frame needs direct mount calipers; a disc frame is limited to 160 mm rotors.
  • Mechanical builds on TiCR. The front derailleur adjuster sits in the eLink slot on the down tube, so check that it is present.
  • Generic carbon checks. Look at the fork crown, the bottom bracket junction and the dropouts, and ask about crash history.

Sizes and fit

Pinarello names its sizes in millimetres. The MY21 Prince comes in nine sizes from 430 to 600. Pinarello says it raised the stack and shortened the reach compared with the Dogma F12 to make the bike less aggressive. Our Pinarello road bike size guide covers how to match height and leg length to those sizes.

Size (MY21) Stack (mm) Reach (mm)
530 554 380
545 570 385
560 586 388

The MY19 to MY20 frames used a different, longer list of sizes. The numbers do not map one to one, and Pinarello's white paper includes a conversion chart, so compare stack and reach rather than the label.

Typical builds you will see

  • MY19 to MY20: Shimano Ultegra 2x11 or Ultegra Di2 2x11 with Fulcrum Racing 5 wheels, per road.cc and BikeRadar.
  • MY21: Shimano Ultegra 2x11 and Ultegra Di2 2x11 on both the Prince and Prince FX, per BikeRadar's UK launch coverage.
  • MY22: retailer listings show Shimano Ultegra Di2 2x12 and SRAM Force eTap AXS 2x12 on disc frames. We did not find Pinarello's own spec sheet for that year, so check the components on the actual bike.

FAQ

Is the Prince just a cheaper Dogma?

Partly. It shares the Dogma's shapes and asymmetric design, in T700 or T900 carbon instead of T1100. Pinarello also gave it a more relaxed geometry, so it is not the same fit.

Prince or the newer F7?

The F series replaced the Prince in February 2023. According to Cyclingnews, Pinarello claimed the F is lighter, stiffer and more aero, and it clears 30 mm tyres. A late Prince FX Disk and an early F7 sit closer together than the names suggest.

Who the Prince suits

The Prince suits a rider who wants Pinarello handling on 25 to 28 mm tyres in a bike that is easier to own than a Dogma. Look for an FX if stiffness and weight matter; a MY21 disc frame is the most current version.

Browse the Pinarello collection and the wider Pinarello road bike range, or the Pinarello F7 that replaced it. The Pre-Owned road bikes collection covers other brands at the same level. For the flagship, see our Pinarello Dogma F used buyer's guide.

If you are unsure whether a MY20 size 550 or a MY21 545 matches the bike you ride now, talk to our concierge with your current stack and reach.

Sources: Pinarello, Prince MY21 white paper, 2020; road.cc, Pinarello launches all new Prince, 2019; BikeRadar, Pinarello Prince FX review, 24 October 2019; BikeRadar, Updated Pinarello Prince and new Paris, 20 July 2020; Cyclingnews, Pinarello overhauls road range, 22 February 2023; Sigma Sports, Prince TiCR Ultegra Di2 Disc 2022 listing. Cover photo: Glory Cycles, CC BY 2.0, via Flickr.